Rohde & Schwarz R&S FSL3 - Page 1532

R&S FSL CALCulate:LIMit Subsystem (WiMAX, K92/K93)
1300.2519.12 6.773 E-11
C
haracteristics
RST value: –
SCPI: device–specific
M
ode
OFDM, OFDMA/WiBro
CALCulate<1|2>:LIMit<1...8>:BURSt:SYMBolerror:MAXimum:RESult?
This command returns the maximum symbol error limit result.
The numeric suffixes <1|2> sets the measurement window for the calculation and the suffixes
<1...8> specify the limit lines (see CALCulate<1|2>:LIMit<1...8>:FAIL? command).
This command is only a query and therefore has no *RST value.
Return values
0 PASSED
1 FAILED
Example
CALC:LIM:BURS:SYMB:MAX:RES?
Maximum symbol error limit result is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CALCulate<1|2>:LIMit<1...8>:SPECtrum:MASK:CHECk:X?
This command returns the x–value at the maximum overstepping of the spectrum mask limits.
The numeric suffixes <1|2> sets the measurement window for the calculation and the suffixes
<1...8> specify the limit lines (see CALCulate<1|2>:LIMit<1...8>:FAIL? command).
This command is only a query and therefore has no *RST value.
Example
CALC:LIM:SPEC:MASK:CHEC:X?
Returns the frequency at the maximum overstepping.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro