Rohde & Schwarz R&S FSL3 - Page 1521

CALCulate:LIMit Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.762 E-11
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CALCulate<1|2>:LIMit<1...8>:BURSt:BERPilot[:AVERage]:RESult?
This command returns the Bit Error Rate for pilot carriers limit result.
This command is only a query and therefore has no *RST value.
Return values
0 PASSED
1 FAILED
Example
CALC:LIM:BURS:BERP:RES?
Average EVM for all carrier limit result is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CALCulate<1|2>:LIMit<1...8>:BURSt:BERPilot:MAXimum
This command sets the maximum Bit Error Rate Limit.
Parameter
–1000000 to 1000000 %
Example
CALC:LIM:BURS:EVM:ALL:MAX?
Maximum EVM for all carrier limit is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro