R&S FSL CALCulate Subsystem
1300.2519.12 6.67 E-11
CALCulate<1|2>:MARKer<1...4>:Y:PERCent
This command positions the selected marker to the given probability. If marker 2, 3 or 4 is
selected and used as a delta marker, it is switched to marker mode.
The numeric suffixes <1|2> are irrelevant for this command.
Note: The command is only available with the CCDF measurement switched on. The
associated level value can be determined with the
C
ALCulate<1|2>:MARKer<1...4>:X command.
Parameter
0 to100%
Example
CALC1:MARK:Y:PERC 95PCT
Positions marker 1 to a probability of 95%.
Characteristics
*RST value: –
SCPI: device–specific
Mode
A, CATV, CDMA, EVDO
To Next Page
Loading...
