Rohde & Schwarz R&S FSL3 - Page 827

CALCulate Subsystem R&S FSL
1300.2519.12 6.68 E-11
CALCulate:MARKer:FUNCtion Subsystem
The CALCulate:MARKer:FUNCtion subsystem checks the marker functions in the instrument.
The following subsystems are included:
• "CALCulate:MARKer:FUNCtion:HARMonics Subsystem" on page 6.82
• "CALCulate:MARKer:FUNCtion:POWer Subsystem" on page 6.86
• "CALCulate:MARKer:FUNCtion:STRack Subsystem" on page 6.93
• "CALCulate:MARKer:FUNCtion:SUMMary Subsystem" on page 6.95
Commands of the CALCulate:MARKer:FUNCtion Subsystem
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:DEModulation[:STATe]
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:DEModulation:CONTinuous
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:DEModulation:HOLDoff
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:DEModulation:SELect
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:CSTep
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks[:IMMediate]
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:COUNt?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:SORT
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:X?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:Y?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:MDEPth[:STATe]
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:MDEPth:RESult?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:MDEPth:SEARchsignal
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NDBDown
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NDBDown:FREQuency?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NDBDown:QFACtor?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NDBDown:RESult?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NDBDown:STATe
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NDBDown:TIME?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NOISe[:STATe]
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:NOISe:RESult?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:REFerence
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:TOI[:STATe]
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:TOI:RESult?
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:TOI:SEARchsignal
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:ZOOM