Rohde & Schwarz R&S FSL3 - Page 845

CALCulate Subsystem R&S FSL
1300.2519.12 6.86 E-11
CALCulate:MARKer:FUNCtion:POWer Subsystem
The CALCulate:MARKer:FUNCtion:POWER subsystem contains the commands for control of power
measurement.
Commands of the CALCulate:MARKer:FUNCtion:POWer Subsystem
– CALCulate<1|2>:MARKer:FUNCtion:POWer[:STATe]
– CALCulate<1|2>:MARKer:FUNCtion:POWer:MODe
– CALCulate<1|2>:MARKer:FUNCtion:POWer:PRESet
– CALCulate<1|2>:MARKer:FUNCtion:POWer:RESult?
– CALCulate<1|2>:MARKer:FUNCtion:POWer:RESult:PHZ
– CALCulate<1|2>:MARKer:FUNCtion:POWer:SELect
Further information
– "Predefined CP / ACP standards" on page 6.86
Predefined CP / ACP standards
Parameter Standard
AWLan WLAN 802.11A
BWLan WLAN 802.11B
CDPD CDPD
D2CDma CDMA 2000 direct sequence
FIS95A, F8CDma CDMA IS95A forward
FIS95C0 CDMA IS95C Class 0 forward
FIS95C1 CDMA IS95C Class 1 forward
FJ008, F19CDma CDMA J–STD008 forward
FTCDMa / TCDMa TD–SCDMA forward
FW3Gppcdma W–CDMA 3.84 MHz forward
M2CDma CDMA 2000 MC3 multi carrier with 3 carriers
NADC NADC IS136
PDC PDC
PHS PHS
RFID14443 RFID 14443
RIS95A, R8CDma CDMA IS95A reverse
RIS95C0 CDMA IS95C Class 0 reverse
RIS95C1 CDMA IS95C Class 1 reverse
RJ008, R19CDma CDMA J–STD008 reverse
RTCDMA TD–SCDMA reverse
RW3Gppcdma W–CDMA 3.84 MHz reverse
S2CDma CDMA 2000 MC1 multi carrier with 1 carrier
TETRA TETRA
WIBRo WIBRO
WIMax WiMAX