R&S FSL CALCulate Subsystem
1300.2519.12 6.85 E-11
CALCulate<1|2>:MARKer<1...4>:FUNCtion:HARMonics:PRESet
This command optimizes the device settings depending on the span setting:
s
pan > 0 Frequency and level of the first harmonic are determined and used for the
measurement list.
zero span The level of the first harmonic is determined. The frequency remains
unchanged.
The numeric suffixes <1/2> and <1...4> are irrelevant.
This command is an event and therefore has no *RST value.
This command is available from firmware version 1.10.
Example
CALC:MARK:FUNC:HARM:PRES
Optimizes the device settings for the harmonic measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
A–F, A–T
To Next Page
Loading...
