Rohde & Schwarz R&S FSL3 - Page 829

CALCulate Subsystem R&S FSL
1300.2519.12 6.70 E-11
C
haracteristics:
*RST value: – (DEModulation is set to OFF)
SCPI: device–specific
M
ode:
A
CALCulate<1|2>:MARKer<1...4>:FUNCtion:DEModulation:SELect
This command selects the demodulation type for the audio demodulator. The command is
independent of the selected marker, the suffixes 1|2 and 1 to 4 are irrelevant.
The numeric suffixes <1|2> are irrelevant for this command.
Parameter
AM | FM
Example
CALC:MARK:FUNC:DEM:SEL FM
Characteristics
*RST value: AM
SCPI: device–specific
Mode
A
CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer
This command sets the center frequency equal to the frequency of the indicated marker.
If marker 2, 3 or 4 is selected and used as delta marker, the marker is switched to the marker
mode.
The numeric suffix <1|2> are irrelevant for this command.
This command is an "event" and therefore has no *RST value and no query.
Example
CALC:MARK2:FUNC:CENT
Sets the center frequency to the frequency of marker 2.
Characteristics
*RST value: –
SCPI: device–specific
Mode
A–F, CATV, SPECM