R&S FSL CALCulate Subsystem (SPECM, K14)
1300.2519.12 6.393 E-11
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum:ABOVe
This command positions the specified delta marker on the next maximum above its current
position (constant x–axis value). The corresponding search in x direction is performed via the
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:LEFT and
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:RIGHt commands.
This command is an event and therefore has no *RST value and no query.
T
he numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:DELT2 ON
Switches on delta marker 2 or switches to delta marker mode.
CALC:DELT2:SPEC:Y:MAX:ABOV
Positions delta marker 2 on the next maximum above its current position.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum:BELow
This command positions the specified delta marker on the next maximum below its current
position (constant x–axis value). The corresponding search in x direction is performed via the
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:LEFT and
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:RIGHt commands.
This command is an event and therefore has no *RST value and no query.
The numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:DELT3 ON
Switches on delta marker 3 or switches to delta marker mode.
CALC:DELT3:SPEC:Y:MAX:BEL
Positions delta marker 3 on the next maximum below its current position.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum:NEXT
This command positions the specified delta marker on the next maximum below or above its
current position (constant x–axis value). The corresponding search in x direction is performed
via the CALCulate<1|2>:DELTamarker<1...4>:MAXimum:NEXT command.
This command is an event and therefore has no *RST value and no query.
The numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:DELT4 ON
Switches on delta marker 4 or switches to delta marker mode.