CALCulate Subsystem (SPECM, K14) R&S FSL
1300.2519.12 6.392 E-11
E
xample
C
ALC:DELT2 ON
Switches on delta marker 2 or switches to delta marker mode.
CALC:DELT2:SPEC:XY:MAX
Positions delta marker 2 on the current maximum.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:XY:MINimum[:PEAK]
This command positions the specified delta marker on the current minimum of the search area.
The search area is defined via the
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:SARea command. .
This command is an event and therefore has no *RST value and no query.
The numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:DELT3 ON
Switches on delta marker 3 or switches to delta marker mode.
CALC:DELT3:SPEC:XY:MIN
Positions delta marker 3 on the current minimum.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MAXimum[:PEAK]
This command positions the specified delta marker on the current maximum in y–axis direction
(constant x–axis value). The corresponding search in x direction is performed via the
CALCulate<1|2>:DELTamarker<1...4>:MAXimum[:PEAK] command.
This command is an event and therefore has no *RST value and no query.
The numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:DELT4 ON
Switches on delta marker 4 or switches to delta marker mode.
CALC:DELT4:SPEC:Y:MAX
Positions delta marker 4 on the current maximum in y–axis direction.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM
To Next Page
Loading...
