Rohde & Schwarz R&S FSL3 - Page 1161

CALCulate Subsystem (SPECM, K14) R&S FSL
1300.2519.12 6.402 E-11
CALCulate:SPECtrogram Subsystem (SPECM, K14)
The CALCulate:SPECtrogram subsystem configures the Spectrogram Measurement option.
Commands of the CALCulate:SPECtrogram Subsystem
– CALCulate<1|2>:SPECtrogram[:STATe]
– CALCulate<1|2>:SPECtrogram:CLEar[:IMMediate]
– CALCulate<1|2>:SPECtrogram:COLor
– CALCulate<1|2>:SPECtrogram:CONTinuous
– CALCulate<1|2>:SPECtrogram:FRAMe:COUNt
– CALCulate<1|2>:SPECtrogram:FRAMe:SELect
– CALCulate<1|2>:SPECtrogram:HDEPth
– CALCulate<1|2>:SPECtrogram:SIZE
– CALCulate<1|2>:SPECtrogram:TSTamp[:STATe]
– CALCulate<1|2>:SPECtrogram:TSTamp:DATA
CALCulate<1|2>:SPECtrogram[:STATe]
This command activates or deactivates the Spectrogram Measurement option.
The numeric suffixes <1|2> are irrelevant for this command.
Parameter
ON | OFF
Example
CALC:SPEC ON
Activates the Spectrogram Measurement option.
Characteristics
RST value: OFF
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:SPECtrogram:CLEar[:IMMediate]
This command deletes the spectrogram result display and the history buffer.
The numeric suffixes <1|2> are irrelevant for this command.
This command is an event and therefore has no *RST value and no query.
Example
CALC:SPEC ON
Activates the Spectrogram Measurement option.
CALC:SPEC:CLE
Deletes the spectrogram result display and the history buffer.
Characteristics
RST value: –
SCPI: device–specific