Rohde & Schwarz R&S FSL3 - Page 1154

R&S FSL CALCulate Subsystem (SPECM, K14)
1300.2519.12 6.395 E-11
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MINimum:BELow
This command positions the specified delta marker on the next minimum below its current
position (constant x–axis value). The corresponding search in x direction is performed via the
CALCulate<1|2>:DELTamarker<1...4>:MINimum:LEFT and
CALCulate<1|2>:DELTamarker<1...4>:MINimum:RIGHt commands.
This command is an event and therefore has no *RST value and no query.
T
he numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:DELT3 ON
Switches on delta marker 3 or switches to delta marker mode.
CALC:DELT3:SPEC:Y:MIN:BEL
Positions delta marker 3 on the next minimum below its current position.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:DELTamarker<1...4>:SPECtrogram:Y:MINimum:NEXT
This command positions the specified delta marker on the next minimum below or above its
current position (constant x–axis value). The corresponding search in x direction is performed
via the CALCulate<1|2>:DELTamarker<1...4>:MINimum:NEXT command.
This command is an event and therefore has no *RST value and no query.
The numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:DELT4 ON
Switches on delta marker 4 or switches to delta marker mode.
CALC:DELT4:SPEC:Y:MIN:NEXT
Positions delta marker 4 on the next minimum below or above its current position.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM