R&S FSL CALCulate:LIMit Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.679 E-11
C
ALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL:MAXimum
This command sets the maximum Error Vector Magnitude Limit. This is a combined figure that
represents the pilot, data and the free carrier.
Parameter
numeric value in dB
Example
CALC:LIM:BURS:EVM:ALL:MAX?
Maximum EVM for all carrier limit is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL:MAXimum:RESult?
This command returns the maximum Error Vector Magnitude Limit result. This is a combined
figure that represents the pilot, data and the free carrier.? (K91 / K91n)"
This command is a query only and thus has no *RST value.
Return values
0 PASSED
1 FAILED
Example
CALC:LIM:BURS:EVM:ALL:MAX:RES?
Maximum EVM for all carrier limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM:DATA[:AVERage]
This command sets the average Error Vector Magnitude limit summary for the data carrier.
Parameter
numeric value in dB
Example
CALC:LIM:BURS:EVM:DATA –30.0
Average EVM for data carrier limit is set to –30.0 dB
To Next Page
Loading...
