CALCulate:LIMit Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.678 E-11
C
haracteristics
*RST value: –
SCPI: device–specific
M
ode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL[:AVERage]
This command sets the average Error Vector Magnitude Limit. This is a combined figure that
represents the pilot, data and the free carrier.
Parameter
numeric value in dB
Example
CALC:LIM:BURS:EVM:ALL –25.0
Average EVM for all carrier limit is set to –25.0 dB
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL[:AVERage]:RESult?
This command returns the average Error Vector Magnitude Limit result. This is a combined
figure that represents the pilot, data and the free carrier.
This command is a query only and thus has no *RST value.
Return values
0 PASSED
1 FAILED
Example
CALC:LIM:BURS:EVM:ALL:RES?
Average EVM for all carrier limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
To Next Page
Loading...
