Rohde & Schwarz R&S FSL3 - Page 1436

R&S FSL CALCulate:LIMit Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.677 E-11
CALCulate<1|2>:LIMit<1>:BURSt:ALL:RESUlt?
This command returns all the limit results.
T
his command is a query only and thus has no *RST value.
Parameter
For details on formats refer to "CALCulate<1|2>:LIMit<1>:BURSt:ALL" on page 6.676.
Example
CALC:LIM:BURS:ALL:RES?
All limit values are returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM[:AVERage]
This command sets the average Error Vector Magnitude Limit for the IEEE 802.11b standard.
Parameter
numeric value in dB
Example
CALC:LIM:BURS:EVM –25.0
Average EVM limit is set to –25 dB
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM[:AVERage]:RESult?
This command returns the average Error Vector Magnitude Limit result for the IEEE 802.11b
standard.
This command is a query only and thus has no *RST value.
Return values
0 PASSED
1 FAILED
Example
CALC:LIM:BURS:EVM:RES?
Average EVM limit result is returned