Rohde & Schwarz R&S FSL3 - Page 1444

R&S FSL CALCulate:LIMit Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.685 E-11
C
ALCulate<1|2>:LIMit<1>:BURSt:IQOFfset[:AVERage]
This command sets the average IQ Offset error limit.
Parameter
numeric value in dB: –1000000 to 1000000
Example
CALC:LIM:BURS:IQOF –10.0
A v e r a g e I Q O f f s e t e r r o r l i m i t i s s e t t o – 1 0 . 0 d B
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:IQOFfset[:AVERage]:RESult?
This command returns the average IQ Offset error limit result.
Example
CALC:LIM:BURS:IQOF:RES?
Average IQ Offset error limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:IQOFfset:MAXimum
This command sets the maximum IQ Offset error limit.
Parameter
numeric value in dB: –1000000 to 1000000
Example
CALC:LIM:BURS:IQOF:MAX 15.0
M a x i m u m I Q O f f s e t e r r o r l i m i t i s s e t t o – 1 5 . 0 d B
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN