Rohde & Schwarz R&S FSL3 - Page 1445

CALCulate:LIMit Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.686 E-11
C
ALCulate<1|2>:LIMit<1>:BURSt:IQOFfset:MAXimum:RESult?
This command returns the maximum IQ Offset error limit result.
Example
CALC:LIM:BURS:IQOF:MAX:RES?
Maximum IQ Offset error limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:SYMBolerror[:AVERage]
This command sets the average symbol error limit.
Parameter
numeric value in Hertz
Example
CALC:LIM:BURS:SYMB 10000
The average symbol error limit is set to 10kHz
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:SYMBolerror[:AVERage]:RESult?
This command returns the average symbol error limit result.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:SYMB:RES?
Average symbol error limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN