Rohde & Schwarz R&S FSL3 - Page 1446

R&S FSL CALCulate:LIMit Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.687 E-11
C
ALCulate<1|2>:LIMit<1>:BURSt:SYMBolerror:MAXimum
This command sets the maximum symbol error limit.
Parameter
numeric value in Hertz
Example
CALC:LIM:BURS:SYMB:MAX?
Maximum symbol error limit is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:SYMBolerror:MAXimum:RESult?
This command returns the maximum symbol error limit result.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:SYMB:MAX:RES?
Maximum symbol error limit result is returned.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:TFALl[:AVERage]
This command sets the average fall time limit.
Parameter
numeric value in seconds
Example
CALC:LIM:BURS:TFAL 0.000001
The average fall time limit is set to 1 µs
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN