Rohde & Schwarz R&S FSL3 - Page 1447

CALCulate:LIMit Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.688 E-11
C
ALCulate<1|2>:LIMit<1>:BURSt:TFALl[:AVERage]:RESult?
This command returns the average fall time limit result.
T
his command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:TFALl:RES?
Average fall time limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:TFALl:MAXimum
This command sets the maximum fall time limit.
Parameter
numeric value in seconds
Example
CALC:LIM:BURS:TFALl:MAX 0.000001
The maximum fall time limit set to 1 µs.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:TFALl:MAXimum:RESult?
This command returns the maximum fall time limit result.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:TRIS:MAX:RES?
Maximum fall time limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN