Rohde & Schwarz R&S FSL3 - Page 1448

R&S FSL CALCulate:LIMit Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.689 E-11
C
ALCulate<1|2>:LIMit<1>:BURSt:TRISe[:AVERage]
This command sets the average rise time limit.
Parameter
numeric value in seconds
Example
CALC:LIM:BURS:TRIS 0.000001
The average rise time limit is set to 1 µs
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:TRISe[:AVERage]:RESult?
This command returns the average rise time limit result.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:TRIS:RES?
The average rise time limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:TRISe:MAXimum
This command sets the maximum rise time limit.
Parameter
numeric value in seconds
Example
CALC:LIM:BURS:TRIS:MAX 0.000001
Maximum rise time limit is set to 1 µs
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN