CALCulate:LIMit Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.690 E-11
C
ALCulate<1|2>:LIMit<1>:BURSt:TRISe:MAXimum:RESult?
This command returns the maximum rise time limit result.
T
his command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:TRIS:MAX:RES?
Maximum rise time limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:SPECtrum:MASK:CHECk:X?
This command returns the X–value at the maximum overstepping of the spectrum mask limits.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:SPEC:MASK:CHEC:X?
Returns the frequency at the maximum overstepping.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:SPECtrum:MASK:CHECk:Y?
This command returns the Y–value at the maximum overstepping of the spectrum mask limits.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:SPEC:MASK:CHEC:Y?
Returns the power at the maximum overstepping.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
To Next Page
Loading...
