Rohde & Schwarz R&S FSL3 - Page 1443

CALCulate:LIMit Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.684 E-11
CALCulate<1|2>:LIMit<1>:BURSt:FERRor[:AVERage]:RESult?
This command returns the average frequency error limit result.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:FERR:RES?
Average frequency error limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:FERRor:MAXimum
This command sets the maximum frequency error limit.
Parameter
numeric value in Hertz
Example
CALC:LIM:BURS:FERR:MAX?
Maximum frequency error limit is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:FERRor:MAXimum:RESult?
This command returns the maximum frequency error limit result.
This command is a query only and thus has no *RST value.
Example
CALC:LIM:BURS:FERR:MAX:RES?
M a x i m u m f r e q u e n c y e r r o r l i m i t r e s u l t i s r e t u r n e d
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN