Rohde & Schwarz R&S FSL3 - Page 1441

CALCulate:LIMit Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.682 E-11
C
haracteristics
*RST value: –
SCPI: device–specific
M
ode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM:PILot[:AVERage]
This command sets the average Error Vector Magnitude limit summary for the pilot carriers.
Parameter
numeric value in dB
Example
CALC:LIM:BURS:EVM:PIL –8.0
Average EVM for pilot carrier limit is set to –8.0 dB
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:LIMit<1>:BURSt:EVM:PILot[:AVERage]:RESult?
This command returns the average Error Vector Magnitude limit result summary for the pilot
carriers.
This command is a query only and thus has no *RST value.
Return values
0 PASSED
1 FAILED
Example
CALC:LIM:BURS:EVM:PIL:RES?
Average EVM for pilot carrier limit result is returned
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN