Rohde & Schwarz R&S FSL3 - Page 1299

DISPlay Subsystem (Noise Figure, K30) R&S FSL
1300.2519.12 6.540 E-11
Example 1
DISP:DATA:TRAC1 NFIG
Sets the noise figure to trace1.
DISP:TRAC:Y:TOP 30
Sets the maximum Y–axis display to 30 dB for trace 1.
Example 2
DISP:DATA:TRAC1 TEFF
Sets the noise temperature to trace1.
DISP:TRAC:Y:TOP 100
Sets the maximum Y–axis display to 100 K for trace 1.
Example 3
DISP:TRAC2:Y:TOP 10
Sets the maximum Y–axis display to 10 dB for trace 2.
Characteristics
*RST value: 20 dB for noise and gain figure, 10000K for noise temperature
SCPI: conform
Mode
NF