R&S FSL 3GPP Base Station Measurements (Option K72)
1300.2519.12 2.109 E-11
Procedure:
1. Set the R&S FSL to its default state.
Press the PRESET key.
The R&S FSL is set to its default state.
2. Change into the 3G FDD BTS mode.
Press the MODE key and activate the 3G FDD BTS option.
3. Set the center frequency to 2.1175 GHz.
Press the FREQ key.
The frequency menu is displayed.
In the dialog box, enter 2.1175 using the numeric keypad and confirm with the GHz key.
4. Set the reference level to 0 dBm.
Press the AMPT key and enter 0 dBm.
5. Start the Power measurement.
Press the MEAS key.
Press the Power softkey.
The signal channel power of the WCDMA signal is displayed.
Fig. 2-78 Power measurement
To Next Page
Loading...
