Remote Commands of the CDMA2000 BTS Analyzer Option (K82) R&S FSL
1300.2519.12 6.612 E-11
D
ISPlay[:WINDow<1|2>]:TRACe<1…6>:Y[:SCALe]:AUTO
This command switches on or off automatic scaling of the Y–axis for the specified trace display.
Automatic scaling sets the Y–axis to automatically scale to best fit the measurement results.
The numeric suffix at WINDow<1|2> selects the measurement window. The numeric suffix at
TRACe<1...6> must be 1.
P
arameter
ONCE
Example
DISP:WIND2:TRAC:Y:SCAL:AUTO ONCE
activates automatic scaling of the Y–axis for the active trace
Characteristics
*RST value: OFF
Mode
CDMA
To Next Page
Loading...
