Rohde & Schwarz R&S FSL3

To Next Page

To Previous Page

STATus Subsystem (WLAN, K91 / K91n) R&S FSL

1300.2519.12 6.744 E-11

STATus:QUEStionable:SYNC:PTRansition

This command determines what bits in the STATus:QUEStionable:SYNC Condition register will

set the corresponding bit in the STATus:QUEStionable:SYNC Event register when that bit has a

positive transition (0 to 1). The variable <number> is the sum of the decimal values of the bits

that are to be enabled.

Parameter

0 to 65535

Example

STAT:QUES:SYNC:PTR 65535

All condition bits will be summarized in the Event register when a positive transition occurs.

Characteristics

*RST value: –

SCPI: device–specific

Mode

WLAN

STATus:QUEStionable:SYNC:NTRansition

This command determines what bits in the STATus:QUEStionable:SYNC Condition will set the

corresponding bit in the STATus:QUEStionable:SYNC Event register when that bit has a

negative transition (1 to 0). The variable <number> is the sum of the decimal values of the bits