Rohde & Schwarz R&S FSL3 - Page 1509

TRACe Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.750 E-11
C
haracteristics
*RST value: –
SCPI: conform
M
ode
WLAN
TRACe:IQ:DATA:MEMory?
For details refer to "TRACe<1|2>:IQ:DATA:MEMory?" on page 6.274.
TRACe:IQ:SRATe
This command allows the sample rate for IQ measurements to be specified.
Example
TRACe:IQ:SRAT 20000
Specifies a sample rate of 20 MHz.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN