R&S FSL TRACe Subsystem (WiMAX, K92/K93)
1300.2519.12 6.863 E-11
Parameter
TRACE1 | TRACE2 | TRACE3 | TRACE4 | TRACE5 | TRACE6 | LIST
For details on the parameters refer to the corresponding measurement type (see list above).
Example
TRAC? TRACE2
The measurement data for the selected graph is returned.
Characteristics
*RST value: –
SCPI: conform
Mode
OFDM, OFDMA/WiBro
TRACe:IQ:DATA:MEMory?
For details refer to "TRACe<1|2>:IQ:DATA:MEMory?" on page 6.274.
TRACe:IQ:SRATe
This command allows the sample rate for IQ measurements to be specified.
Parameter
1440000 to 32.248E6 Hz
Example
TRAC:IQ:SRAT 2000000
Specifies a sample rate of 20 MHz.
Characteristics
*RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
