CDMA2000 BTS Analyzer (Option K82) R&S FSL
1300.2519.12 4.326 E-11
Fig. 4-33: Power vs PCG for an occupied channel with power control
Remote: CALC2:FEED "XTIM:CDP:PVSL"
Result Summary
Selects the numeric result display of many measurement results. Note the effects of the Trace
Mode softkey differ from other measurements. The Min Hold and Max Hold values are already
given in the Min and Max columns of the Result Summary table. When in Average trace mode,
the Current column is renamed to Average and the corresponding values are displayed. The
current values are displayed in the Current column, when the View trace mode is activated.
The result display is subdivided as follows:
– Global Results
– PCG
– Channel
Fig. 4-34: Result summary
Remote: CALC2:FEED "XTIM:CDP:ERR:SUMM"
Remote: CALC:MARK:FUNC:CDP:RES?
To Next Page
Loading...
