R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.333 E-11
Composite Constell
Selects the Composite Constellation result display.
The measurement provides information about the constellation points at chip level. The total
signal is taken into account over the selected PCG. Therefore it is not possible to select a
specific channel number. For each of the 1536 chips, a constellation point is displayed in the
diagram.
Fig. 4-41: Composite constellation diagram
Remote: CALC:FEED "XTIM:CDP:COMP:CONS"
Power vs Symbol
Selects the Power versus Symbol result display.
In this result display, the absolute power in dBm at every symbol number is calculated for the
selected channel and the selected PCGs. This calculation thus takes into account the results of
a channel for a specific PCG. To set the channel and the PCG, use the Select Ch/PCG softkey.
Fig. 4-42: Power of a channel on symbol level
Remote: CALC:FEED "XTIM:CDP:PVSY"
To Next Page
Loading...
