R&S FSL Notation
1300.2519.12 6.4 E-11
These keywords mark parameters which may be entered as numeric values or be set using specific
k
eywords (character data). The following keywords given below are permitted:
M
AXimum: This keyword sets the parameter to the largest possible value.
MINimum: This keyword sets the parameter to the smallest possible value.
DEFault: This keyword is used to reset the parameter to its default value.
U
P: This keyword increments the parameter value.
DOWN: This keyword decrements the parameter value.
The numeric values associated to MAXimum/MINimum/DEFault can be queried by adding the
corresponding keywords to the command. They must be entered following the quotation mark.
Example:
SENSe:FREQuency:CENTer? MAXimum
Returns the maximum possible numeric value of the center frequency as result.
<arbitrary block program data>
This keyword is provided for commands the parameters of which consist of a binary data block.
To Next Page
Loading...
