Simrad EK15 User Manual

SimradEK15
•Stand-alone
ThissynchronizationmodeisusediftheEK15isworkingbyitself,andno
synchronizationisrequired.Thisisthedefaultsetting.TheEK15willoperate
usingitsinternalpingintervalparameters,independentofsignalsarrivingatthe
synchronizationport.
•Master
ThismodeisusediftheEK15shallactasaMasterinasynchronizedsystem.
Theperipheralhydroacousticsystemwillthenonlybepermittedtotransmit
whenenabledbytheEK15.Whenthismodeischosen,theEK15willrunusing
itsinternalpingintervalparameters,andtransmitexternaltriggersignalstothe
peripheralsystem(s)onthesynchronizationport.
•Slave
ThismodeisusediftheEK15shalltransmitonlywhenpermittedbyaperipheral
system.Whenthismodeischosen,theEK15willwaitforanexternaltriggerto
appearonthechosensynchronizationportbeforeeachping.
2Synchronizationdelay
Thisdelayparameterisuseddifferentlydependingonthechosensynchronization
mode.
•Stand-alone:Notused.
•Slave:TheEK15willwaitforthedelaytimeaftertheexternaltriggersignalhas
arrivedbeforetransmittingtheping.(Post-trigger)
•Master:TheEK15willwaitforthedelaytimeaftertheexternaltriggersignal
hasbeensenttotheslavesbeforetransmittingtheping.(Pre-trigger)
Notethatthisdelaywillonlyworkwhenthesynchronizationissetupusing
aserialport.
3Synchronizationport
Thisistheinterfaceportcurrentlyusedtotransmitorreceivesynchronization
signals.
Youcanselectoneofthefollowingports:
•None
•SerialPort1
Relatedtopics
•Setupmenu;functionsanddialogsonpage170
172
351718/C

Simrad EK15 Specifications

General

Brand	Simrad
Model	EK15
Category	Marine Equipment
Language	English