Simrad EK15 - Adding Horizontal Markers to the Echogram

Operationalprocedures
Relatedtopics
•Activemenuonpage139
•Echogramdialogboxonpage206
Procedure
1ClicktheActiveicon.
ThisiconislocatedundertheMainmenu.ItisusedtoopentheActive
menu.
2ClickEchogramtoopentheEchogramdialogbox.
TheEchogramdialogboxallowsyoutosetuptheparameterscontrollingthe
echogrampresentation.Thethreetabscontrolthehorizontallines,theechogram
typewithappliedTVG,andhowfasttheechogrammovesacrossthedisplay.
3OntheEchogramtab,chooseEchogramType.
Note
Thechosenechogramtypewillonlyapplytothecurrentlyselected“active”
echogram.Ifyouwishthechangestoapplytoallsimilarechograms,clickApply
ToAll.
4ClickOKtosavethecurrentsettingsandclosethedialogbox.
Addinghorizontalmarkerstotheechogram
Purpose
Thisprocedureexplainshowyoucanenableoneormorehorizontalmarkersinthe
currentechogram.
Description
TheechogramsprovidedbytheEK15maybesetuptocontainadditionalinformation.
Thefollowinglines,markersandannotationscanbeenabled:
•Bottomlineonpage120
•Whitelineonpage120
•Variabledepthlineonpage121
•Rangeotherlinesonpage121
•Biomasslineonpage121
•Rangescalesonpage122
•Verticalticksonpage122
•Annotationsonpage123
Relatedtopics
•Activemenuonpage139
•Echogram;Linestabonpage208
351718/C
65