Simrad EK15 - Disconnecting a Frequency Channel; Modifying a Transceiver IP Address

SimradEK15
5Selectafrequencychannelthatisavailable,andchoosethecorrecttransducerin
thespinbox.
Note
Thisisacriticaltask.Youmustensurethatthecorrecttransducerisselected.If
youconnectthetransceivertoatransducerthatcannothandlethepowerrating,it
maybedamagedbeyondrepair .
OntheEK15,choosetransducer200–28CMasdefault.Othertransducerscanalso
beused.
6ObservethatthestatusfortherelevantfrequencychannelschangestoInstalled.
7ClickOKtosavethecurrentsettingsandclosethedialogbox.
Disconnectingafrequencychannel
Purpose
Thisprocedureexplainshowtodisconnectafrequencychannel.
Relatedtopics
•Installingafrequencychannelonpage81
Procedure
1ClicktheSetupicon.
ThisiconislocatedundertheMainmenu.ItisusedtoopentheSetupmenu.
2ClicktheInstallationbuttontoopentheInstallationmenu.
Onthemenu,clickTransceiverInstallationtoopentheTransceiverInstallation
dialogbox.
ThepurposeoftheTransceiverInstallationdialogboxistosetupthenecessary
parameterstoconnecttheEK15computertothetransceiver(s)andthetransducer(s).
3Observethatcurrentfrequencychannelsarelistedinthedialogbox.
Forashortdescriptionofthefrequencychannelconcept,seeInstallingafrequency
channelonpage81.
4Onthefrequencychannelyouwishtodisconnect,setthetransducertypetoNone.
5ObservethatthestatusfortherelevantfrequencychannelschangestoAvailable.
6ClickOKtosavethecurrentsettingsandclosethedialogbox.
ModifyingatransceiverIPaddress
Purpose
ThisprocedureexplainshowtomodifythisIPaddress.
82
351718/C