Sinee EM500 - Torque Control Parameter Group

EM500 Open-Loop Vector Control Inverter User Manual
121
F13
Torque Control Parameter Group
F13.00
Speed/Torque
Control
0: Speed Control
1: Torque Control
0
〇
F13.01
Torque Setting
0: Numeric Torque Setting F13.02
1: AI1
2: AI2
3: AI3
4: AI4 (Expansion Card)
5: High-Frequency Pulse Input (X7)
6: Communication Percentage Setting
(Full ranges of options 1 to 6,
correspond to numeric torque setting
F13.02)
7: Not Used
8: digital potentiometer
0
〇
F13.02
Numeric Torque
Setting
-200.0 - 200.0 (100.0= Motor Rated
Torque)
%
100.0
●
F13.03
Preset Torque 1
-200.0 - 200.0
%
0.0
●
F13.04
Preset Torque 2
-200.0 - 200.0
%
0.0
●
F13.05
Preset Torque 3
-200.0 - 200.0
%
0.0
●
F13.06
Torque Control
Acceleration/Decele
ration Time
0.00 - 120.00
s
0.05
●
F13.07
Not Used
F13.08
Upper Limit
Frequency of
Torque Control
0: Set through F13.09
1: AI1
2: AI2
3: AI3
4: AI4 (Expansion Card)
5: High-Frequency Pulse Input (X7)
6: Communication Percentage Setting
7: Direct Communication Setting
0
〇
F13.09
Upper Limit
Frequency of
Torque Control
0.00 - Maximum Frequency F00.16
Hz
50.00
●
F13.10
Upper Limit
Frequency Offset
0.00 - Maximum Frequency F00.16
Hz
0.00
●
F13.11
Static Friction
Torque
Compensation
0.0 - 100.0
%
0.0
●
F13.12
Static Friction
0.00 - 50.00
Hz
1.00
●