EM500 Open-Loop Vector Control Inverter User Manual
237
7.9 F08 Group: Preset Speed and Simple PLC Parameter
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
0.00 - Maximum Frequency F00.16
16 preset speeds through the control terminal of multiple preset speeds and 15 preset
frequency commands, as well as numeric frequency setting F00.07
Table 7-10 Preset Speed Commands and Preset Speed Terminals
Corresponding
function code
To Next Page
Loading...
