Sinee EM500 - F25.47 Tens Place=1; F26 Application of Water Supply Advanced Group

EM500 Open-Loop Vector Control Inverter User Manual
327
corresponding warning display on the keyboard, while the overpressure alarm output
terminal is valid, but does not affect the system to continue running. When the
overpressure disappears, the alarm is automatically canceled.
F25.47 Tens Place=1:
Emergency Standby: When overpressure occurs, the inverter output is stopped and enters
the standby state. When the pressure returns to the normal pressure range, automatically
re-adjust the output, return to normal operation.
No.
Function
Range
Unit
Default
Type
F25.61
Primary pump
current running
time
0~65535
h
×
F25.62
Primary pump
total running time
0~65535
h
●
F25.63
Standby pump
current running
time
0~65535
h
×
F25.64
Standby pump
total running time
0~65535
h
●
F25.61
Primary pump
current running
time
0~65535
h
×
F25.75
Reset the current
running time
0: Not Used
1: Reset
0
〇
F25.61 ~ F25.64 record the use of the Primary pump and standby pump time, can be
cleared by F25.75 current running time.
7.22 F26 Application of water supply
advanced group
This advanced function must be equipped with a clock expansion card to use
No.
Function
Range
Unit
Default
Type
F26.00
The Gregorian
calendar year Set
2000~2099
XXX
〇
F26.01
The Gregorian
calendar Dater
Set
01~12(Month). 01~31(Day)
XXX
〇
F26.02
The Gregorian
calendar Week
0~6 0: Sunday
XXX
〇