Sinee EM500 - Before Installation; During Installation; Safety Information; Safety Precautions

EM500 Open-Loop Vector Control Inverter User Manual
3
Safety Information
In this manual, there are two types of safety information.
Danger: The label indicates that a failure to follow instructions can result in
serious injury or even death.
Caution: The label indicates that a failure to follow instructions can result in
moderate or slight injury and device damage.
Please read this chapter carefully before system installation, debugging and
maintenance and always follow the safety precautions below during operation. SINEE
will not undertake any damage or loss caused by a failure to follow the instructions.
Safety Precautions
Before Installation:
Danger
1.
Do not install inverter if its package is wetted or any its component is missing or broken.
2. Do not install inverter if the label information on its package is not identical to that on
inverter.
Caution
1.
Be careful when carrying or transporting inverter so as to avoid damage!
2. Do not use inverter if it is damaged or any component is missing so as to avoid injury!
3. Do not touch the parts of control system with bare hands so as to avoid ESD!
During Installation:
Danger