Sinee EM500 - F27.07 Feedforward Range 0; F27.12 Feedforward Range 5; F27.13 Soft Start Incremental

EM500 Open-Loop Vector Control Inverter User Manual
343
4
Feedforward range 5
F27.12
Feedforward range
5
Feedforward range 5~100.00
%
72.00
●
F27.13
Soft start
incremental
0.00~50.00
%/s
0.60
●
F27.14
feedforward
increment 1
0.00~50.00
%/s
0.11
●
F27.15
feedforward
increment 2
0.00~50.00
%/s
0.30
●
F27.16
feedforward
increment 3
0.00~50.00
%/s
0.75
●
F27.17
feedforward
increment 4
0.00~50.00
%/s
1.55
●
F27.18
feedforward
increment 5
0.00~50.00
%/s
4.00
●
F27.19
feedforward
increment 6
0.00~50.00
%/s
11.00
●
F27.13 Soft start incremental
Correspond to the feedforward change rate in the first time of F09.21 .
F27.07 Feedforward range 0
Correspond to the feedforward change rate on deviation in the range of F27.07 ~ F27.08.
F27.12 Feedforward range 5
Correspond to the feedforward change rate on deviation in the range of F27.12 ~
100.00%
No.
Function
Range
Unit
Default
Type
F27.20
Material supply
disruptions control
way
Ones Place:Material supply
disruptions detection mode
0: Automatic detection
1: external signal
Tens Place:Material supply
disruptions detection control
0: Output is greater than the
material supply interrupt
detection limit detection
1: No detection
hundreds place: Material supply
disruptions process mode
11211
〇