Sinee EM500 - 11.5 BASE

EM500 Open-Loop Vector Control Inverter User Manual
385
11.4.3 Dedicated Functions Interface card configuration scheme description
EM500 inverter is equipped with a variety of special function expansion card, expansion
card specific models are shown in Table 11 3.
Table 11-3 Models of Communication Expansion Cards
Model No.
Description
Application field
EC-IO-K2
Air compressor interface card
Air compressor Application
EC-TM-A1
Clock cards
Water supply Application
EC-PSPP-A1
Phase sequence phase detection
card
Synchronous machine frequency conversion
11.5 Base
The five specifications of EM500 inverters may have an installation base that has the
same width as that of corresponding inverter, as shown in Figure 11-2. The installation
method for EM500 is changed to the cabinet mounting. If required, please indicate it
while ordering and install it by yourself. Refer to Figure 11-3 for details. The installation
dimensions for the anchor bolt of the base are shown in Figure 11-4
Table 11-4 Base Installation Dimensions
Model No.
Base Height(mm)
W(mm)
H(mm)
d(mm)
EM500-055G - 075G
165
300
243
13
EM500-090G - 132G
253
300
243
13
EM500-160G - 200G
253
300
258
13
EM500-220G - 280G
308
416
293
13
EM500-315G - 400G
300
500
340
13