Sinee EM500 - Page 77

EM500 Open-Loop Vector Control Inverter User Manual
77
Overall
The value of the whole function code represents present
parameter selection or meaning.
Decimal
Digit
Represents some options or present meaning of present
function code.
Binary digit
Each binary digit represents some options or present
meaning of present function codes
Unit
Metric unit of function codes. Their units and abbreviations are as follows:
Hz
Hertz
kW
Kilowatt
us
Microsecon
d
kHz
Kilohertz
kWh
Kilowatt-h
our
★
ms
Millisecon
d
%
Percentage
★
M
h
Megawatt
hour
s
Second
V
Volt
mΩ
Milliohm
min
Minute
A
Ampere
mH
Millihenry
h
Hour
rpm
Revolution
s per
minute
℃
Degree
Celsius
m
Meter
★
%: Its benchmarks are different depending upon different physical
quantity; kWh: kilowatt-hour.
Default
Factory defaults of function codes or reset to the defaults (F12.14=1).
In figures (for
example 50.00)
For various power segments, present values of the
function codes are the default values.
Model
For different power segments, the function codes have
different defaults.
XXX
For different power segments or batches, the function
codes have different defaults.
Type
Property change of function codes (whether change is permitted and
conditions for change)
●
Can be changed while inverter is running; present function
code can be changed regardless of the status of inverter.
〇
Cannot be changed while inverter is running; present function
code can be changed except the running status.
×
Read only: the property of present function code can not be
changed under any status.