OnAir 3000 Digital Mixing Console
5-50 Operation
Document generated: 10.10.14
SW V6.0
5.3.4.5 Studio 2/3 Pages
The controls of the studio 2/3 pages are operated in parallel with the controls
on the talkback boxes in the corresponding studio(s).
Source Selector The source selector buttons can be configured with the desired sources; the
currently selected source is highlighted.
Follow CR Selects the same monitoring source for studio 2 or 3 as is selected for the
control room; this also works for sources not configured on any button of the
source selector.
Phase Phase inversion for the left studio monitor loudspeaker channel.
Cut, Dim These buttons allow to mute or dim the studio loudspeakers; highlighted if
active.
Loudspeaker ON L, R
Loudspeaker / Phone Volume Monitoring volumes are indicated with the bar graphs. The exact values are
displayed in dB and can be set with the rotary encoders below the fields.
To Next Page
Loading...
