4-17
IM 701210-05E
Common Operations
4
Explanation
The values specified using the keys can be reset to the factory default values. This is
useful when you wish to clear previous settings or start the measurement from scratch.
Initialization
Initialization refers to the act of resetting the settings to factory default.
For a list of the factory default settings, see appendix 7, “List of Initial Values.”
Settings That Cannot Be Initialized
• Date and time settings
• Settings related to communications and Ethernet interface
• SCSI ID number setting
• Menu/message language setting
• USB keyboard language setting
• Setting the time difference from GMT
• Setting the motor rotation of the internal hard disk
Canceling Initialization
If you initialize the settings by mistake, you can press the Undo soft key to set the
DL750/DL750P back to the settings that existed before the initialization.
Initializing All the Settings
Turning ON the power switch while holding down RESET initializes settings related to
communications and Ethernet interface and SCSI ID settings also. If you initialize the
DL750/DL750P in this fashion, the settings cannot be set back to their original condition.
4.4 Initializing Settings
To Next Page
Loading...
Need help?
General
