Contents-2
IM 701210-05/06E
Chapter 3 Making Preparations for Measurements
3.1 Handling Precautions ............................................................................................... 3-1
3.2 Installing the Instrument ........................................................................................... 3-3
3.3 Installing Input Modules ........................................................................................... 3-5
3.4 Connecting the Power Supply and Turning the Power Switch ON/OFF .................. 3-8
3.5 Setting the Date and Time ..................................................................................... 3-13
3.6 Connecting Probes ................................................................................................ 3-15
3.7 Compensating the Probe (Phase Correction) ........................................................ 3-21
3.8 Connecting Measuring Leads ................................................................................ 3-23
3.9 Connecting Thermocouples ................................................................................... 3-24
3.10 Connecting a Bridge Head (Only on Strain Modules) ............................................ 3-25
3.11 Connecting Logic Probes ....................................................................................... 3-28
3.12 Connecting Acceleration Sensors .......................................................................... 3-30
3.13 Connecting Sensors to the Frequency Module ...................................................... 3-32
3.14 Connecting the Earphone Microphone with a PUSH Switch and Connecting the
Speaker .................................................................................................................. 3-33
Chapter 4 Common Operations
4.1 Operations and Functions of Keys and the Jog Shuttle ........................................... 4-1
4.2 Entering Values and Strings ..................................................................................... 4-3
4.3 USB Keyboard/USB Mouse ..................................................................................... 4-7
4.4 Initializing Settings ................................................................................................. 4-16
4.5 Performing Auto Setup ........................................................................................... 4-18
4.6 Performing Calibration ........................................................................................... 4-21
4.7 Using the Help Function ......................................................................................... 4-22
Chapter 5 Horizontal and Vertical Axes
Voltage Measurement (On the 701250, 701251, 701255, 701260, 701261, 701262,
701265, or 701275)
5.1 Turning Channels ON/OFF ...................................................................................... 5-1
5.2 Setting T/div ............................................................................................................. 5-2
5.3 Setting V/div ............................................................................................................. 5-3
5.4 Setting the Vertical Position of Waveforms .............................................................. 5-5
5.5 Setting the Input Coupling ........................................................................................ 5-7
5.6 Setting the Probe Type............................................................................................. 5-9
5.7 Setting the Bandwidth ............................................................................................ 5-10
5.8 Zooming Vertically by Setting the Zoom Rate ........................................................ 5-12
5.9 Zooming Vertically According to the Upper and Lower Limits of the
Display Range ........................................................................................................ 5-14
5.10 Setting the Offset Value ......................................................................................... 5-16
5.11 Using the Linear Scaling Function (AX+B, P1-P2)................................................. 5-18
5.12 Inverting Waveforms .............................................................................................. 5-21
5.13 Displaying the All Channel Setup Menu ................................................................. 5-22
5.14 Setting the Time Base (Internal Clock/External Clock) .......................................... 5-25
5.15 Observing RMS Values .......................................................................................... 5-28
Contents