YOKOGAWA DL750 User Manual

16-48
IM 701210-06E
16.8 Setting the Time Difference from GMT
(Greenwich Mean Time)/SNTP
Procedure
MEASURE CURSOR RESET SELECT
CH
ALL CH
MODE POSITION
SIMPLE/ENHANCED
ACQ START/STOP
SETUP DISPLAY
ZOOM
DUAL
CAPTURE
HISTORY MATH
1
CH
2
CH
3
CH
4
CH
5
CH
6
CH
7
CH
8
CH
9
CH
10
CH
11
CH
12
CH
13
CH
14
CH
15
CH
16
DELAY
MANUAL TRIG
V/DIV TIME/DIV
TRIGGER
TRIG D
VERTICAL
HORIZONTAL
CAL X-Y
SEARCH
7
DSP 1
8 9
DSP 2
654
1
0
23
ENTER
m
DSP 6DSP 5
LOGIC A LOGIC B EVENT
DSP 3 DSP 4
EXP
GO/NO-GO
ACTION
FILE SHIFT
FILE SHIFT HELP MISC NUM KEY
1. Press MISC.
2. Press the Network soft key.
3. Press the Others soft key. The Others setup menu appears.
Setting the Time Difference from GMT
4. Use the jog shuttle and SELECT to set the Time Hour of Time Difference From
GMT in the range of –12 to 13.
5. Likewise, set the Minute of Time Difference From GMT in the range of 0 to 59.
Note
Minute can be specified only if Time Hour is set in the range of –11 to 12. (Minute cannot be
specified if Time Hour is set to –12 or 13.)
Setting the SNTP(Simple Network Time Protocol)
6. Use the jog shuttle and SELECT to set the Exec at Power On to ON or OFF.
7. Use the jog shuttle and SELECT to select SNTP Server.
8. Enter the IP address of the SNTP server according to the procedure given in
section 4.2.
9. Use the jog shuttle and SELECT to select Time Out.
10. Enter the time out time in the range from 1-60 according to the procedure given
in section 4.2.

YOKOGAWA DL750 Specifications

General

Brand	YOKOGAWA
Model	DL750
Category	Measuring Instruments
Language	English