YOKOGAWA DL750 User Manual

13-15
IM 701210-06E
Saving and Loading Data
13
13.6 Changing the SCSI ID Number
Procedure
MEASURE CURSOR RESET SELECT
CH
ALL CH
MODE POSITION
SIMPLE/ENHANCED
ACQ START/STOP
SETUP DISPLAY
ZOOM
DUAL
CAPTURE
HISTORY MATH
1
CH
2
CH
3
CH
4
CH
5
CH
6
CH
7
CH
8
CH
9
CH
10
CH
11
CH
12
CH
13
CH
14
CH
15
CH
16
DELAY
MANUAL TRIG
V/DIV TIME/DIV
TRIGGER
TRIG D
VERTICAL
HORIZONTAL
CAL X-Y
SEARCH
7
DSP 1
8 9
DSP 2
654
1
0
23
ENTER
m
DSP 6DSP 5
LOGIC A LOGIC B EVENT
DSP 3 DSP 4
EXP
GO/NO-GO
ACTION
FILE SHIFT
FILE SHIFT HELP MISC NUM KEY
1. Press MISC.
2. Press the SCSI ID soft key. The SCSI ID number setup menu appears.
Changing the ID Number of the DL750/DL750P
3. Press the Own ID soft key.
4. Turn the jog shuttle to select a value in the range of 0 to 7.
Changing the ID Number of the Internal Hard Disk
5. Press the Internal ID soft key.
6. Turn the jog shuttle to select a value in the range of 0 to 7.
Executing the ID Number Change
7. Press the Initialize SCSI soft key. The SCSI ID is changed to the selected ID
number.
The SCSI icon ( ) at the upper left corner of the screen blinks while the
change is in progress. When the change is complete, the icon disappears.
Note
• If you do not execute Initialize SCSI after changing Own ID or Internal ID, the new ID is
not activated until the DL750/DL750P is powered up the next time.
• To save the data after executing Initialize SCSI, select the destination medium and
directory.

YOKOGAWA DL750 Specifications

General

Brand	YOKOGAWA
Model	DL750
Category	Measuring Instruments
Language	English