12-19
IM 701210-06E
Printing the Screen Image Data
12
Executing the Print Operation
12. Press PRINT. The screen image data is printed on the network printer. To
abort printing, press PRINT while printing is in progress.
While printing is in progress,
is indicated at the upper left corner of the
screen.
Explanation
Like the built-in printer, you can print the screen image data on a network printer
1
via the
Ethernet network.
1. Printing is possible on a printer or printer server supporting the TCP/IP protocol.
Selecting the Output Format
The following six printer formats are supported.
• ESC-P
• ESC-P2
• LIPS3
• PCL5
•BJ
• PostScript
Output Resolution When Printing Using the BJ Format
When printing the screen image data to a BJ printer, select the output resolution from
180 dpi, 300 dpi, 360 dpi, and 600 dpi.
Comment
A comment string of up to 20 characters can be printed at the bottom right section. The
comment setting is linked with the PRINT menu > Comment setting.
Color
Select from the following:
ON: Print the data using colors similar to the screen. (No background color and grid
printed in black)
OFF: Prints the image using the same colors as the image printed using the built-in
printer.
Note
Printing is possible on printers that support the TCP/IP protocol.
12.4 Printing the Screen Image Data on a Network Printer
To Next Page
Loading...
Need help?
General
