YOKOGAWA DL750 - Page 465

13-11
IM 701210-06E
Saving and Loading Data
13
Selecting the FD Format
6. Press the Format soft key. The format selection menu appears.
7. Turn the jog shuttle to select 2DD 720K or 2HD 1.44M.
Proceed to step 9.
Selecting the Zip Disk, PC Card, or USB Storage Device Format
6. Press the Format soft key. The format selection menu appears.
No setting is necessary in formatting the Zip disk, PC card, or USB storage
device.
Proceed to step 11.
Selecting the Number of Partitions of the PC Card
6. Press the Format soft key. The format selection menu appears.
Proceed to step 9.
Selecting the Number of Partitions of the SCSI Device
6. Press the Format soft key. The format selection menu appears.
7. Press the Partition soft key.
8. Turn the jog shuttle to set the number of partitions.
Proceed to step 9.
Note
The number of partitions is 1 for removable disks (such as SCSI and Zip disks).
Selecting the Number of Partitions of the Internal Hard Disk (Optional)
• Selecting the Number of Partitions
6. Press the Format soft key. The format selection menu appears.
7. Press the Partition soft key.
8. Turn the jog shuttle to set the number of partitions to 2 or 3.
• Setting the Realtime Recording Area
9. Press the RealTime Recording Area soft key.
10. Turn the jog shuttle to set the realtime recording area in the range of 30 to 70%
of the entire capacity of the internal hard disk. Proceed to step 11.
Note
Do not place files other than those created by realtime recording in the Real Time area of the
internal hard disk. Otherwise, the realtime recording may not operate properly.
Floppy
disk
Zip disk/
PC card/
USB storage SCSI device
Built-in
hard disk
13.5 Formatting the Storage Medium