YOKOGAWA DL750 User Manual

13-21
IM 701210-06E
Saving and Loading Data
13
Loading the Waveform Data
MEASURE CURSOR RESET SELECT
CH
ALL CH
MODE POSITION
SIMPLE/ENHANCED
ACQ START/STOP
SETUP DISPLAY
ZOOM
DUAL
CAPTURE
HISTORY MATH
1
CH
2
CH
3
CH
4
CH
5
CH
6
CH
7
CH
8
CH
9
CH
10
CH
11
CH
12
CH
13
CH
14
CH
15
CH
16
DELAY
MANUAL TRIG
V/DIV TIME/DIV
TRIGGER
TRIG D
VERTICAL
HORIZONTAL
CAL X-Y
SEARCH
7
DSP 1
8 9
DSP 2
654
1
0
23
ENTER
m
DSP 6DSP 5
LOGIC A LOGIC B EVENT
DSP 3 DSP 4
EXP
GO/NO-GO
ACTION
FILE SHIFT
1. Press FILE.
2. Press the File Item soft key. The File Item setup menu appears.
3. Press the Waveform soft key.
Selecting the Data Type
4. Press the Data Type soft key. The data type selection menu appears.
5. Press the Binary soft key.
Selecting the Load Source Medium/Directory
6. Press the Load soft key. The load setup menu and File List window appear.
7. Select the load source directory according to steps 13 to 18 in “Saving the
Waveform Data.”
Selecting the File to Be Loaded
8. Turn the jog shuttle to select the file.
Executing the Load Operation
9. Press the Load Exec soft key. A dialog box appears showing the module
information of the selected waveform data and the current module information of
the DL750/DL750P.
10. Press the Load Exec soft key again. The selected file is read from the directory
indicated in Path=...... At the same time, the Load Exec soft key changes to an
Abort soft key.
Note
• Waveform data on modules whose information differs from the current module information
of the DL750/DL750P cannot be loaded.
• Waveform data that has voice memo recorded (waveform data in binary format (.wvf
extension) and realtime recorded waveform data (.wdf extension)) can also be loaded.
For details on the voice memo function, see section 7.9.
Aborting the Load Operation
11. Press the Abort soft key. The load operation is aborted. At the same time, the
Abort soft key changes to a Load Exec soft key.
Specifying the Files to Be Displayed in the File List Window and Displaying Properties
12. Carry out steps 27 to 29 in “Saving the Waveform Data.”
Note
When a file saved by specifying Z1 (or Z2) is loaded, the data of the record length of Z1 (or
Z2) is displayed right justified.
13.7 Saving/Loading the Waveform Data

YOKOGAWA DL750 Specifications

General

Brand	YOKOGAWA
Model	DL750
Category	Measuring Instruments
Language	English