13-61
IM 701210-06E
Saving and Loading Data
13
Selecting the Copy Source Files at Once
8. Turn the jog shuttle to select the file, directory, or medium.
9. Press the All set soft key. Asterisks (*) are displayed to the left of every file in
the directory containing the selected file or directory to indicate that they will be
copied. At the same time, the All Set soft key changes to an All Reset soft key.
Resetting the Selected Copy Source Files at Once
10. Press the All Reset soft key. Asterisks (*) are removed from the left of every file
in the directory containing the selected file or directory to indicate that they will
not be copied. At the same time, the All Reset soft key changes to an All Set
soft key.
Selecting the Copy Destination
11. Press the Dest Dir soft key. The copy execution menu and the copy destination
File List window appears.
Selecting Copy Destination Medium and Directory
12. Select the copy destination medium and directory according to steps 4 to 9 in
section 13.8, “Saving/Loading the Setup Data.”
Executing the Copy Operation
13. Press the Copy Exec soft key. All the copy source files with asterisk marks are
copied.
Specifying the File to Be Displayed in the File List Window and Viewing File Properties
14. Carry out steps 19 to 21 in section 13.8, “Saving/Loading the Setup Data.”
13.16 Copying Files
To Next Page
Loading...
Need help?
General
